Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
Need to sharpen Woodmaster CT http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=30242 |
Page 1 of 1 |
Author: | Chris aka Sniggly [ Tue Dec 07, 2010 5:04 pm ] |
Post subject: | Need to sharpen Woodmaster CT |
Anyone know where I can have this done? FYI - Iturra doesn't re-sharpen. |
Author: | Kevin Waldron [ Tue Dec 07, 2010 5:23 pm ] |
Post subject: | Re: Need to sharpen Woodmaster CT |
Check with some of the local cabinet shops. Most of these guys have local sharping shops that come by on a regular basis and pickup items to sharpen, some of these guys are very skilled in what they do. Kevin |
Author: | WaddyThomson [ Tue Dec 07, 2010 7:39 pm ] |
Post subject: | Re: Need to sharpen Woodmaster CT |
I'd bet a nickel there is a sharpening shop in Jacksonville. It's a big place. Check these guys. If they don't do it, they'll know someone who does, I bet. http://www.franksindustrialsharpening.c ... rvice.html |
Author: | Robert Dunn [ Tue Dec 07, 2010 7:44 pm ] |
Post subject: | Re: Need to sharpen Woodmaster CT |
Would a bandsaw blade benefit from a more refined sharpening, like a plane iron? The woodmaster Ct i just got seems very rough compared to my hand tool blades. |
Author: | bluescreek [ Tue Dec 07, 2010 8:42 pm ] |
Post subject: | Re: Need to sharpen Woodmaster CT |
I doubt you will find any place that will sharped the CT as it is a carbide toothed blade . The carbide is so small that it may not lend itself to a resharpen. |
Author: | DannyV [ Tue Dec 07, 2010 9:28 pm ] |
Post subject: | Re: Need to sharpen Woodmaster CT |
If you get really desperate you might try Laguna. They have sharpening services for their RE SAW King. Kind of on the other side of the country from you though Chris. |
Author: | Bobc [ Wed Dec 08, 2010 3:33 am ] |
Post subject: | Re: Need to sharpen Woodmaster CT |
Here ya go Chris. D. Walton Saw Inc. D. Walton Saw Inc. Contact Person: Darren Walton 44 Woodland Avenue San Rafael CA 94901 http://www.bitsnblades.com |
Author: | bluescreek [ Wed Dec 08, 2010 6:42 am ] |
Post subject: | Re: Need to sharpen Woodmaster CT |
I didn't think they would resharpen . I may look into that myself thanks for the education RC |
Author: | Chris aka Sniggly [ Wed Dec 08, 2010 9:34 am ] |
Post subject: | Re: Need to sharpen Woodmaster CT |
Thanks a bunch Bob....that's what I needed! Chris |
Author: | Bobc [ Wed Dec 08, 2010 10:52 am ] |
Post subject: | Re: Need to sharpen Woodmaster CT |
Glsd I could help out. |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |