| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| ca pour fill http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=29837 |
Page 1 of 1 |
| Author: | James W B [ Mon Nov 08, 2010 8:18 pm ] |
| Post subject: | ca pour fill |
So if I put a coat of shellac on before pore filling with ca.Does the shellac coat need to be sanded before pore filling? I`ve always used Z-Poxy.I just don`t like the stuff. James |
|
| Author: | Andy Gamble [ Mon Nov 08, 2010 10:52 pm ] |
| Post subject: | Re: ca pour fill |
I don't see any reason why you would need to sand. The CA will stick to shellac just fine. In fact, sanding through the finish in spots would cause blotchiness. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|