Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Belly Buldge?
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=29822
Page 1 of 1

Author:  JoshDuvall [ Mon Nov 08, 2010 12:18 am ]
Post subject:  Belly Buldge?

New here so excuse me if this is a stupid question or in the wrong section.
I would love to learn to build acoustics but first I have a question with a Gibson J200 I have.

It has been set up with medium gauge strings and I've recently noticed a slight "buldge" around the bridge. I have heard that a slight lift is normal and fine but was just wondering how much if it actually is normal.

If I take a straight edge and run it from the neck towards the bridge and sit it flat against the side (on the binding) there is about a 1/16" to 3/32" gap at the bridge end. And the same if I measure from the "heel" end to the bridge. Does this sound Normal?

Sorry in advance for any terminology errors. Thanks.

Author:  JoshDuvall [ Mon Nov 08, 2010 10:04 am ]
Post subject:  Re: Belly Buldge?

Ok when I measured this way I got an 1/8" on either side so I assume this is pretty normal?

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/