| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Which one? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=29696 |
Page 1 of 1 |
| Author: | 000lover [ Thu Oct 28, 2010 9:50 pm ] |
| Post subject: | Which one? |
Would prefer one of these two due to price: Porter-Cable 7310 DEWALT D26670 ( Only one I can get local) I can spend a little more for one of these IF they are hands down better than the above: Bosch PR10E Ridgid R2401 Note: It will be used for binding in a jig so weight and special holding capability is not an issue. |
|
| Author: | 000lover [ Thu Oct 28, 2010 10:28 pm ] |
| Post subject: | Re: Which one? |
just found out that I can get the ridgid in town for only 15 bucks more than the dewalt. Im leaning that way at the moment. |
|
| Author: | rono [ Thu Oct 28, 2010 11:32 pm ] |
| Post subject: | Re: Which one? |
I bought the ridgid 2401 based on the input from others here on the forum. I've been really happy with it. The depth control design is great. My budget doesn't allow for a lot of power tool purchases so it's made the rounds from flush trim bits for moulds to a wells-karol circle jig to a binding jig...it's done everything admirably. |
|
| Author: | 000lover [ Fri Oct 29, 2010 8:41 am ] |
| Post subject: | Re: Which one? |
yes, i think my mind is made up. And I can get it local (hopefully tonight)! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|