| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Woolson Neck Jig Pictures anyone? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=29385 |
Page 1 of 1 |
| Author: | Neil Gardiner [ Thu Oct 07, 2010 12:47 pm ] |
| Post subject: | Woolson Neck Jig Pictures anyone? |
Well, I just received my Woolson Neck Jig Plans. Thanks Lance for shipping them so quick! It looks pretty daunting. I wondered if anyone has any pictures of the finished product? And maybe pictures of the jig in use? Thanks Neil |
|
| Author: | JJ Donohue [ Thu Oct 07, 2010 1:35 pm ] |
| Post subject: | Re: Woolson Neck Jig Pictures anyone? |
Here are some of the completed jig. Basically the beam mimics the angle of the body at the upper bout where the FB extension follows. The holding plate for the neck assumes that same angle and then the router cuts the tenon appropriately. I don't have any pics of the jig in action but it works like a charm. Attachment: IMG_1229.JPG Attachment: IMG_1227.JPG Attachment: IMG_1225.JPG
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|