| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Dust Cyclones http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=29353 |
Page 1 of 1 |
| Author: | Michael Smith [ Tue Oct 05, 2010 2:36 pm ] |
| Post subject: | Dust Cyclones |
Time to put in a dust collecting cyclone system in my workshop. I have about 1000 square feet. Plan to deport dust from Bandsaw, table saw, radial arm, drum sander, planer, second bandsaw, drill press. and one or two other tools. I have been looking at the Penn State Industries 2.5HP Tempest system http://www.pennstateind.com/store/dust-collection.html My questions are... Has anyone had experience with this company? and should I go to the 3.5HP model or another brand altogether. thanks, Mike |
|
| Author: | Dan Roach [ Tue Oct 05, 2010 2:49 pm ] |
| Post subject: | Re: Dust Cyclones |
There is a lot of good information in this topic: http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=29312 |
|
| Author: | Edward Taylor [ Tue Oct 05, 2010 4:36 pm ] |
| Post subject: | Re: Dust Cyclones |
Judging by your square footage and number of runs you will probably want something bigger than 2.5 hp, it might get you by but bigger would be better of course. |
|
| Author: | Howard Klepper [ Tue Oct 05, 2010 9:07 pm ] |
| Post subject: | Re: Dust Cyclones |
I'm happy with the 3.5 hp Penn State. For your space and tools, I recommend you go with 3.5 hp. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|