Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Show me or tell about your drill press dust collection
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=29294		 Page 1 of 1
Author:  Ed Haney [ Thu Sep 30, 2010 8:49 pm ]
Post subject:  Show me or tell about your drill press dust collection
I have a 16" Delta floor standing drill press that needs dust collection. I'll use it for sanding as well as drilling and planning. What has worked for you? Pictures would be helpful if possible.

Thanks,
Ed
Author:  Michael Lloyd [ Fri Oct 01, 2010 11:54 am ]
Post subject:  Re: Show me or tell about your drill press dust collection
Hi Ed,

I use the Dust Chute from Lee Valley. Simple and easy to use.

http://www.leevalley.com/en/wood/page.aspx?p=30041&cat=1,42401&ap=1

Regards,
Author:  Ken C [ Fri Oct 01, 2010 12:50 pm ]
Post subject:  Re: Show me or tell about your drill press dust collection
Ed, I built this table for my drill press earlier in the year. It is a project I had wanted to do for years. The top drawer is about half the depth of the table. Behind the drawer lies an enclosed dust collection bin. You can't see in the picture, but on the side near the back, just under the table is an opening just large enough for me to stick my vacuum hose in. The inserts for the top are phenolic, and I have several to accomodate different size sanding drums. If I am just boring holes, I can turn the vacuum on and occasionally brush the dust into the bin to be sucked away by the vacuum.

Ken

Attachment:
DrillPressTable.jpg
Author:  Terence Kennedy [ Fri Oct 01, 2010 6:39 pm ]
Post subject:  Re: Show me or tell about your drill press dust collection
Image
Author:  WudWerkr [ Sat Oct 02, 2010 9:00 am ]
Post subject:  Re: Show me or tell about your drill press dust collection
brrooooom and dust pan my man Guess im old school . lololol laughing6-hehe
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/