| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Overarm Dust Collection for Table Saws http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=29149 |
Page 1 of 1 |
| Author: | Chris aka Sniggly [ Mon Sep 20, 2010 9:52 am ] |
| Post subject: | Overarm Dust Collection for Table Saws |
I'm looking for ideas to help deal with dust flying back up at me. The zero clearance insert and lower cabinet dust collection helps...but it doesn't stop it.....especially when taking small off cuts that aren't the full kerf of the blade. Homespun...or otherwise. |
|
| Author: | Edward Taylor [ Mon Sep 20, 2010 10:01 am ] |
| Post subject: | Re: Overarm Dust Collection for Table Saws |
I have heard good things about these: http://www.exaktortools.com/index2.htm Kinda pricey though. |
|
| Author: | Dan Pennington [ Mon Sep 20, 2010 12:36 pm ] |
| Post subject: | Re: Overarm Dust Collection for Table Saws |
There are a lot of plans around for inexpensive home made over arm collctors like this one: http://www.amazon.com/gp/product/images ... 55&s=books and if you do some googling, you should be able to find free plans on some of the wood working sites. |
|
| Author: | Terry Stowell [ Mon Sep 20, 2010 7:30 pm ] |
| Post subject: | Re: Overarm Dust Collection for Table Saws |
Todd, what did you use for where the top mounts the cabinet area? I've used, or still use, are a magnetic sign remnant, packing tape, backer rod etc. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|