| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Uke pickup installation question (McIntyre Acoustic Feather) http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=29092 |
Page 1 of 1 |
| Author: | oli-lgw [ Wed Sep 15, 2010 10:07 pm ] |
| Post subject: | Uke pickup installation question (McIntyre Acoustic Feather) |
Hi everyone! So as the title says I need to install a McIntyre Acoustic Feather pickup (model UF-07) in a Uke. It is to be placed under the saddle, between the strings. But there is a problem: I have a brace running all the way from under the sound hole to the tail block right in the middle if the top, where the two top plates are joined. So how do I install the transducer? Wrap around the brace, make a notch in it...?? here's the pickup: http://s281.photobucket.com/albums/kk22 ... s007-1.jpg Thanks for any advices! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|
