| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Fret slotting templates http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=28984 |
Page 1 of 1 |
| Author: | Fred Tellier [ Thu Sep 09, 2010 1:16 pm ] |
| Post subject: | Fret slotting templates |
Are the locating pin diameters the same on the StewMac and LMI fretboard slotting templates? I use the Stewmac but LMI lists a scale length that I am interested in getting, will I need to get a different pin. Fred |
|
| Author: | Brock Poling [ Thu Sep 09, 2010 1:33 pm ] |
| Post subject: | Re: Fret slotting templates |
No. They are different sizes |
|
| Author: | Fred Tellier [ Thu Sep 09, 2010 2:37 pm ] |
| Post subject: | Re: Fret slotting templates |
What size is the LMI pin? Fred |
|
| Author: | DannyV [ Thu Sep 09, 2010 8:25 pm ] |
| Post subject: | Re: Fret slotting templates |
LMI is 3/32 Fred. I also have one from High Mtn. and it's a bit of an odd ball. I built removable fences with the index pin for each template in the fence. Seems to work well. Danny |
|
| Author: | Fred Tellier [ Thu Sep 09, 2010 8:56 pm ] |
| Post subject: | Re: Fret slotting templates |
Thanks Dan,that's what I needed to Know Fred |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|