Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Cool item in classifieds
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=28958		 Page 1 of 1
Author:  Mike OMelia [ Tue Sep 07, 2010 9:57 pm ]
Post subject:  Cool item in classifieds
Anybody notice that Brock is offering to trade a lightly used 16-32 sander for a 10-20?!?!? Where was this deal when I was looking to upgrade from my 10-20? Wha! As far as I can tell, it's still there. If I didn't have a 10-20, I would offer 550, then Brock could buy a 10-20!!!!!!! I'm guessing it has a stand.

Please don't get me in trouble. If u want it and don't have a classified subscription, splurge the 12 bucks and contact via that forum.
Author:  Brock Poling [ Tue Sep 07, 2010 11:00 pm ]
Post subject:  Re: Cool item in classifieds
Mike O'Melia wrote:
Anybody notice that Brock is offering to trade a lightly used 16-32 sander for a 10-20?!?!? Where was this deal when I was looking to upgrade from my 10-20? Wha! As far as I can tell, it's still there. If I didn't have a 10-20, I would offer 550, then Brock could buy a 10-20!!!!!!! I'm guessing it has a stand.

Please don't get me in trouble. If u want it and don't have a classified subscription, splurge the 12 bucks and contact via that forum.


Yep, it has a stand. Thanks for the props.

:-)
Author:  Brock Poling [ Wed Sep 08, 2010 7:24 am ]
Post subject:  Re: Cool item in classifieds
On a 15A or 20A circuit?

My 16/32 runs very close as well. If I take too big of a cut it pops my breaker as well. Over the years I have learned to finesse it. Some day I will get me one of those BIG sanders... ;-)
Author:  Mike OMelia [ Wed Sep 08, 2010 7:30 am ]
Post subject:  Cool item in classifieds
Here we go again! The motor breaker wil pop if u overwork the sander. I'm guessing the true duty cycle of the motor is less than 100% outside of a very narrow typical usage band. I have seen that happen with my 10-20 (when I had it). But then, AIR, I was thicknessing hardwood back and side sets. Not the same usage as Brock is planning.
Author:  WendyW [ Wed Sep 08, 2010 11:52 am ]
Post subject:  Re: Cool item in classifieds
I run a 16/32 on a un-airconditioned screened porch on a long extension cord from a 20 amp circuit. It can be mighty hot outside here in the Arizona summer and I have never had it pop a breaker. This weekend I ran it for 2 hours straight and it was over 100 degrees out, and it ran like the energizer rabbit. Either I am lucky, or there is something wrong with your machines. I do take just a hair off at a time.
Author:  SteveSmith [ Wed Sep 08, 2010 12:04 pm ]
Post subject:  Re: Cool item in classifieds
Mine will kick the breaker on the machine if I take too big of a bite but doesn't seem to be an issue if I take it easy. If it becomes a problem I will check out the issue and possibly install a new part with different characteristics.
Author:  Mike OMelia [ Sun Sep 12, 2010 11:59 pm ]
Post subject:  Cool item in classifieds
What cracks me up about this is as soon as this sells we will see another post in here about someone needing a thickness sander.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/