Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
Old bender http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=28946 |
Page 1 of 1 |
Author: | Bill PIllmore [ Tue Sep 07, 2010 11:24 am ] |
Post subject: | Old bender |
Does anyone have one of these they would like to get rid of, an extra element, or where I might find an element. Thanks ![]() Thanks mail@billpillmore.com |
Author: | Darrel Friesen [ Tue Sep 07, 2010 11:35 am ] |
Post subject: | Re: Old bender |
A barbeque starter would work well in place of that. |
Author: | jackwilliams [ Tue Sep 07, 2010 12:29 pm ] |
Post subject: | Re: Old bender |
I gave away a homemade bender a few years ago with a very similar heating element, the main difference the base allowed it to be screwed into a light bulb socket. It had originally been used in an old-time electric radiant heater. If I were in your situation, I would take the heating element to an old-time hardware store, or take it to a kitchen stove repairman and see if the wire element itself might be replaced. regards, jack |
Author: | John A [ Tue Sep 07, 2010 2:18 pm ] |
Post subject: | Re: Old bender |
give this guy a call - found him on google - ![]() http://www.hudsonscustommachining.com/ |
Author: | jackwilliams [ Tue Sep 07, 2010 5:15 pm ] |
Post subject: | Re: Old bender |
That's a great find on those old elements John ! |
Author: | Bill PIllmore [ Wed Sep 08, 2010 1:19 pm ] |
Post subject: | Re: Old bender |
Thanks for the tip - http://www.hudsonscustommachining.com/. I sent him an email - couldn't find them on his price list of oddities. Bill |
Author: | Bill PIllmore [ Wed Sep 08, 2010 1:43 pm ] |
Post subject: | Re: Old bender |
IN case anyone else is needing on of these old elements, here is the info: They are $30 each, NOS still in the box, old but never used. State preference of 660 or 1,000 watts when ordering. Add $4.95 for priority postage carefully wrapped to insure they arrive in one piece. Thanks again for the lead. Bill |
Page 1 of 1 | All times are UTC - 5 hours |
Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |