| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Touch Up Gun http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=28629 |
Page 1 of 1 |
| Author: | jsmith [ Sun Aug 15, 2010 8:09 pm ] |
| Post subject: | Touch Up Gun |
I have a Fuji turbine system for spraying my nitro finishes. I like the results, but am looking for a touch up gun for small sand thoughs, like happen on the edge of bindings. Is there a gun out there that's reasonably priced that someone would recommend? Could a person use one of those small airbrush guns that run on propellant? Someone told me that Home Depot sells a cheap model. Anyone out there know of that? Basically, what do you folks use for small touchups? Thanks in advance. J |
|
| Author: | Michael [ Mon Aug 16, 2010 1:36 am ] |
| Post subject: | Re: Touch Up Gun |
I use this Preval unit... http://www.stewmac.com/shop/Finishing_s ... _Unit.html I can mix small quantity of anything I want and spray without getting out the big gun. Michael |
|
| Author: | TonyFrancis [ Mon Aug 16, 2010 4:04 am ] |
| Post subject: | Re: Touch Up Gun |
- |
|
| Author: | jsmith [ Mon Aug 16, 2010 3:04 pm ] |
| Post subject: | Re: Touch Up Gun |
thanks, folks. |
|
| Author: | alan stassforth [ Mon Aug 16, 2010 8:57 pm ] |
| Post subject: | Re: Touch Up Gun |
paasche type h. cheap, simple, no needle. i used mine a coupla days ago to touch up a broken neck heal with varnish, doesn't even need polishing! # 5 tip. padma recommended it on a thread a while ago, so you know it's good. |
|
| Author: | jsmith [ Tue Aug 17, 2010 12:36 am ] |
| Post subject: | Re: Touch Up Gun |
Alan, Can you adjust the fan on the Paasche H? I'm looking to get down to about 3/8" coverage. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|