| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Useful small saw recommendation http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=28611 |
Page 1 of 1 |
| Author: | JohnAbercrombie [ Sat Aug 14, 2010 1:45 pm ] |
| Post subject: | Useful small saw recommendation |
I've always found it tricky to do a controlled job cutting back reinforcement strips (for braces) and similar jobs. Either the cut was too shallow, or I ended up scoring the adjacent surface. I bought a LeeValley veneer saw recently (for cutting veneer- no surprise there) and I've found it's a very handy tool for shallow cuts. So if you have $30 'burning a hole in your pocket', it might be worth a look. http://www.leevalley.com/US/wood/page.aspx?p=64310&cat=1,42884 Cheers John |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|