Useful small saw recommendation

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Forum rules

Be nice, no cussin and enjoy!

Useful small saw recommendation

Page 1 of 1

[ 1 post ]

Print view

Previous topic | Next topic

Author

Message

JohnAbercrombie

Post subject: Useful small saw recommendation

Posted: Sat Aug 14, 2010 1:45 pm

Brazilian Rosewood

Joined: Fri Nov 03, 2006 6:50 pm
Posts: 2711
Location: Victoria, BC
First name: John
Last Name: Abercrombie
Status: Amateur

I've always found it tricky to do a controlled job cutting back reinforcement strips (for braces) and similar jobs. Either the cut was too shallow, or I ended up scoring the adjacent surface.

I bought a LeeValley veneer saw recently (for cutting veneer- no surprise there) and I've found it's a very handy tool for shallow cuts.

So if you have $30 'burning a hole in your pocket', it might be worth a look.
http://www.leevalley.com/US/wood/page.aspx?p=64310&cat=1,42884

Cheers
John

Top

Page 1 of 1

[ 1 post ]

Board index » Luthiers Forum Rooms » Guitar Building Forum

All times are UTC - 5 hours

Who is online

Users browsing this forum: No registered users and 37 guests

You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot post attachments in this forum

Jump to:

Official Luthiers Forum!

Forum rules

Useful small saw recommendation

Who is online