| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Going to Lancaster PA http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=28559 |
Page 1 of 1 |
| Author: | JoeWV [ Mon Aug 09, 2010 8:03 am ] |
| Post subject: | Going to Lancaster PA |
I have to travel to Lancaster for work but should have some time for shopping and such. Are there any luthier or general woodworking stores or shops I should visit? Also any good wood sources there? Thanks |
|
| Author: | DYeager [ Fri Aug 13, 2010 5:16 pm ] |
| Post subject: | Re: Going to Lancaster PA |
Yikes, Joe - I used to live near Romney, and I once had a girlfriend in Lancaster (decades apart!) and I wouldn't want to make that drive. I hope you're not going to do that daily. Dan |
|
| Author: | Jim Kirby [ Fri Aug 13, 2010 5:23 pm ] |
| Post subject: | Re: Going to Lancaster PA |
More woodworking than luthiery. Hearne Hardwoods in Oxford, PA, about 20-30 minutes SE of Lancaster. Groff and Groff in Quarryville, probably 1/3 the distance closer. Jim |
|
| Author: | mikemcnerney [ Sat Aug 14, 2010 6:05 am ] |
| Post subject: | Re: Going to Lancaster PA |
I would check out Hearne if you are into resawing. He had some incredible curly koa last year & definitely has stuff that is not listed on the website. MM |
|
| Author: | Terry Stowell [ Sat Aug 14, 2010 8:49 am ] |
| Post subject: | Re: Going to Lancaster PA |
Thanks for the tips, I'm in Harrisburg (1 hr away) and will be visiting both |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|