| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Curly Spanish Cedar bending thickness.... http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=28496 |
Page 1 of 1 |
| Author: | meddlingfool [ Wed Aug 04, 2010 10:31 am ] |
| Post subject: | Curly Spanish Cedar bending thickness.... |
I'm going to run a set through the sander today for an OM or OOO. I usually go to .90 but am wondering if I should go thinner cause of the curl. Any thoughts? My bender is a blanket/slat style fron John Hall... |
|
| Author: | John Mayes [ Wed Aug 04, 2010 2:11 pm ] |
| Post subject: | Re: Curly Spanish Cedar bending thickness.... |
Spanish cedar bends easy. .080-.090 should be fine. |
|
| Author: | meddlingfool [ Wed Aug 04, 2010 2:48 pm ] |
| Post subject: | Re: Curly Spanish Cedar bending thickness.... |
Thanks John, I split the differenc and quit a .085. I've never bent curly stuff before... |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|