| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Info on StewMac binding router bit http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=28331 |
Page 1 of 1 |
| Author: | JeremiahB. [ Fri Jul 23, 2010 9:41 am ] |
| Post subject: | Info on StewMac binding router bit |
Could anyone who owns one of these tell me the actual diameter of the cutter bit. I've contacted StewMac twice and it's like pulling teeth trying to get this information. I have a rabbeting bit and I wanted to order more bearings to produce different sized ledges but if the cutters are different diameters, the corresponding ledges, of course, will not match. Also, is the inside diameter of the bearings .25" - Thanks for your help. |
|
| Author: | Marcus [ Fri Jul 23, 2010 12:31 pm ] |
| Post subject: | Re: Info on StewMac binding router bit |
0.925" cutting dia 0.25" inside bearing dia |
|
| Author: | Fred Tellier [ Fri Jul 23, 2010 12:33 pm ] |
| Post subject: | Re: Info on StewMac binding router bit |
I don't use the StewMac but the LMI cutter is 1" and the bearings are .250 ID and they have more sizes. Fred |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|