| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| another guy another bandsaw question http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=28176 |
Page 1 of 1 |
| Author: | P@uL [ Mon Jul 12, 2010 10:58 am ] |
| Post subject: | another guy another bandsaw question |
so i own a 1984 14" tru cut band saw. just recently it started vibrating like crazy to where it was unusable. so i figured the tires had never been replaced and when flipping the switch with the guard off i could see space between the tire and wheel where it was not in contact with the blade. these things were 3 inches longer than the replacement ones that i got for it so it needed it. anyway so my question now is my upper wheel seems loose to me. i have the bolt tightened up to the bearing and it spins freely. and the only thing on it are a height and tilt adjustment. so is the upper wheel held in securely with blade tension or am i missing something here... im not expecting anyone to own one of these machines but i was told the replacement parts for this Asian cast iron armed knockoff would come from delta. maybe a dumb question but my instruction manual say's nothing about this. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|