| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| I'm stuck. http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=27992 |
Page 1 of 1 |
| Author: | Ed Haney [ Sun Jun 27, 2010 9:49 am ] |
| Post subject: | I'm stuck. |
Never mind. Problem solved. Ed |
|
| Author: | woody b [ Sun Jun 27, 2010 9:55 am ] |
| Post subject: | Re: I'm stuck. |
I'd use a high speed die grinder with a carbide bit to grind the head off. |
|
| Author: | StevenWheeler [ Sun Jun 27, 2010 9:56 am ] |
| Post subject: | Re: I'm stuck. |
Good Morning Ed, Those screws can be a bugger. Try turning the object the screw is holding up to see if you can unscrew it that way. If that dosen't work, slide a thin prybar in there and strike it a few times with a hammer to break the screw. Steve |
|
| Author: | Ed Haney [ Sun Jun 27, 2010 10:02 am ] |
| Post subject: | Re: I'm stuck. |
Thanks guys. I got it out. |
|
| Author: | Steve Walden [ Sun Jun 27, 2010 10:06 am ] |
| Post subject: | I'm stuck. |
Howdy fellow Texan! Ed, those screws should break fairly easily. As was posted before, either prying or a pair of pliers under the head should do the deed. Steve W Sent from my iPhone using Tapatalk |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|