Looks like a very functional jig Glenn!
The bridges turned out nice, sure sorry to hear you have such an onerous work schedule ahead of you, having to spend the summer in Paris, dam shame!!!
![[headinwall]](./images/smilies/headbangwalluf8.gif "Mad")
Joe
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Bridge Slotting Jig http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=27863 |
Page 1 of 1 |
| Author: | Glenn LaSalle [ Wed Jun 16, 2010 12:14 pm ] |
| Post subject: | Bridge Slotting Jig |
I haven't had a whole lot of time to get in the shop lately due to alot of Business travel (will be spending most of summer in Paris for work). However, i did get a few hours in and built a bridge slotting jig based on photos from the archives. I am mostly happy with it. I knocked out a few bridges to try it out (all are Mad RW, with the exception of 1 BRW). Attachment: P1070199.JPG Attachment: P1070197.JPG Attachment: P1070196.JPG I still need to sand the bridges, but overall I am mostly happy with them (the middle left I drilled the holes a little too far to the left - still trying to figure out how I screwed that one up). Glenn |
|
| Author: | Joe Sustaire [ Wed Jun 16, 2010 12:32 pm ] |
| Post subject: | Re: Bridge Slotting Jig |
Looks like a very functional jig Glenn! The bridges turned out nice, sure sorry to hear you have such an onerous work schedule ahead of you, having to spend the summer in Paris, dam shame!!! Joe |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|