| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Ridgid Oscillating Sander Upgrades http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=27791 |
Page 1 of 1 |
| Author: | Haans [ Sat Jun 12, 2010 7:05 am ] |
| Post subject: | Re: Ridgid Oscillating Sander Upgrades |
Fillipo, another thing to mention is the possible static buildup from the plastic fittings. I use them but run a wire, spiraling it around the fitting and screwing it to the metal duct on each side. To be extra safe, I also run a wire inside. And, don't forget to bare the wire in the flex tubing and ground it also. 
|
|
| Author: | TonyKarol [ Sat Jun 12, 2010 9:15 am ] |
| Post subject: | Re: Ridgid Oscillating Sander Upgrades |
Nicew mods Fillipo - now can you figure out an easy way to make the drums taller  .... couldnt do that so I bought a bigger machine yesterday !!! Happy fathers Day to me (and all the rest of us ) ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|