yep.... bob is your man
![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Need some inlay work done cut/inlay http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=27670 |
Page 1 of 1 |
| Author: | LuthierSupplier [ Thu Jun 03, 2010 9:31 am ] |
| Post subject: | Need some inlay work done cut/inlay |
Can someone recommend someone who would be willing to cut and inlay into the fretboard? I'm asking for a friend of mine, and he even designed the inlays. He would normally do it himself, but just too busy, and he is designing a new instrument, and wants the designs to be new and delicate. These would be for a baritone ukulele sized instrument(not a uke). A CNC would be a big plus, but it doesn't have to be. The fret boards would be sent to you to do the inlay work. Cost is also a factor. PM me, or post in this thread. Thanks! |
|
| Author: | Alain Moisan [ Thu Jun 03, 2010 9:48 am ] |
| Post subject: | Re: Need some inlay work done cut/inlay |
Bob Garrish. http://www.saintlutherie.com/ |
|
| Author: | peterm [ Thu Jun 03, 2010 10:31 am ] |
| Post subject: | Re: Need some inlay work done cut/inlay |
yep.... bob is your man
|
|
| Author: | LuthierSupplier [ Thu Jun 03, 2010 11:39 am ] |
| Post subject: | Re: Need some inlay work done cut/inlay |
Thanks guys! I guess I should have mentioned that it needs to be in the US. But thanks anyway! I did have a few PM's that were helpful. Thanks! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|