| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Cleaning off Menzerna buffing compound http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=27608 |
Page 1 of 1 |
| Author: | Bill Higgs [ Fri May 28, 2010 5:47 pm ] |
| Post subject: | Cleaning off Menzerna buffing compound |
What would you recommend to clean off Menzerna buffing compound if you needed to spray another topcoat of waterbased laquer? Bill |
|
| Author: | woody b [ Fri May 28, 2010 8:29 pm ] |
| Post subject: | Re: Cleaning off Menzerna buffing compound |
To prep for a coat, or re coat of finish I use naptha, then mineral spirits, then vinegar, then a tack cloth. I don't know if all of these are safe for waterbased finishes. |
|
| Author: | Bill Higgs [ Fri May 28, 2010 9:21 pm ] |
| Post subject: | Re: Cleaning off Menzerna buffing compound |
Thanks guys. Naptha it is. Bill |
|
| Author: | Mike Collins [ Sat May 29, 2010 6:07 am ] |
| Post subject: | Re: Cleaning off Menzerna buffing compound |
If there is any trace of Naptha left it will not let the waterbase adhere. mike |
|
| Author: | woody b [ Sat May 29, 2010 6:33 am ] |
| Post subject: | Re: Cleaning off Menzerna buffing compound |
Filippo Morelli wrote: Can you tell us why the additional fluids after naptha? Never heard of chasing anything after naptha, so I'm curious ... Filippo It's the way I've always done it. In my mind (which is very large, but pretty much empty LOL) the mineral spirits will remove some oils naphtha won't, and the vinegar will remove any glue spots or residue. It's easier to prevent fisheyes than it is to fix them. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|