| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| When to install electronics in archtop? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=27139 |
Page 1 of 1 |
| Author: | Ricardo [ Sat Apr 24, 2010 4:24 pm ] |
| Post subject: | When to install electronics in archtop? |
On an ES-175 type guitar, are all the electronics installed before closing in the box? How is finishing done (masking off everything?) |
|
| Author: | Evan Gluck [ Sat Apr 24, 2010 6:36 pm ] |
| Post subject: | Re: When to install electronics in archtop? |
The electronic harness is put in through the bridge pickup cavity. Use surgical tubing around the pot shafts and pull them up through the holes for the controls. Obviously this should be done post finish work. Hope this helps, Best, Evan |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|