| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| HMTCSwap Stuff - UPDATE http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=27110 |
Page 1 of 1 |
| Author: | Shane Neifer [ Thu Apr 22, 2010 12:52 pm ] |
| Post subject: | HMTCSwap Stuff - UPDATE |
Hi everyone. I just wanted to update on the swap stuff. I have most of the packages wrapped but I have a few more to do. I am away until Monday so won't be able to get back to them until I return. So I apologize for the delay and committ to getting all of the packages shipped early part of next week. I had to make up a bunch more radius sanding blocks so that took a bit more time than I had anticpated. Thanks again and have a great weekend! Shane |
|
| Author: | Dave Fifield [ Thu Apr 22, 2010 6:15 pm ] |
| Post subject: | Re: HMTCSwap Stuff - UPDATE |
Shane, I'm glad I'm not the only one who's running behind on getting the swap stuff sorted and out!! I'm only just at the stage where I'm ready to send final totals with shipping to my buyers! It takes a LOT more work than you think to be a swap seller, doesn't it?! Cheers, Dave F. |
|
| Author: | Dennis Leahy [ Thu Apr 22, 2010 7:02 pm ] |
| Post subject: | Re: HMTCSwap Stuff - UPDATE |
Shane Neifer wrote: Hi everyone. I had to make up a bunch more radius sanding blocks ... Shane Hi Shane, Did you make enough that I might ask for an additional one? That would allow me to put 80 / 120 on one block, and 220 / 320 on another. I'm thinking that would work out perfectly! If you have even MORE, I might grab another one or two, to use as some raffle prizes at the Stringfest Gathering in July. I'm sure the shipping price won't change much for 1 or 2 or 3... Let me know! Thanks, Dennis |
|
| Author: | Shane Neifer [ Mon Apr 26, 2010 10:14 am ] |
| Post subject: | Re: HMTCSwap Stuff - UPDATE |
Dennis Leahy wrote: Shane Neifer wrote: Hi everyone. I had to make up a bunch more radius sanding blocks ... Shane Hi Shane, Did you make enough that I might ask for an additional one? That would allow me to put 80 / 120 on one block, and 220 / 320 on another. I'm thinking that would work out perfectly! If you have even MORE, I might grab another one or two, to use as some raffle prizes at the Stringfest Gathering in July. I'm sure the shipping price won't change much for 1 or 2 or 3... Let me know! Thanks, Dennis Just let me know Dennis and I can rattle off a few more. I have a few blanks ready to go and I am just about to change my blank holding system to make the whole operation even faster. Send me an email, I want to talk about the stringfest thing. Thanks Shane |
|
| Author: | Dennis Leahy [ Mon Apr 26, 2010 11:13 am ] |
| Post subject: | Re: HMTCSwap Stuff - UPDATE |
Shane Neifer wrote: Dennis Leahy wrote: Shane Neifer wrote: Hi everyone. I had to make up a bunch more radius sanding blocks ... Shane Hi Shane, Did you make enough that I might ask for an additional one? That would allow me to put 80 / 120 on one block, and 220 / 320 on another. I'm thinking that would work out perfectly! If you have even MORE, I might grab another one or two, to use as some raffle prizes at the Stringfest Gathering in July. I'm sure the shipping price won't change much for 1 or 2 or 3... Let me know! Thanks, Dennis Just let me know Dennis and I can rattle off a few more. I have a few blanks ready to go and I am just about to change my blank holding system to make the whole operation even faster. Send me an email, I want to talk about the stringfest thing. Thanks Shane OK, will email... Thanks! Dennis |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|