| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| What's Happening In YOUR Shops April 16th? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=27002 |
Page 1 of 2 |
| Author: | truckjohn [ Thu Apr 15, 2010 10:01 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
Unfortunately, almost nothing... Everything has been happening *outside* ... I planted out far too much stuff in the yard... Hole digging galore... I have run thru about 1/2 ton of mulch so far -- and I am about 20% done with the mulch work... They always talk about the Home being the Biggest investment... I believe "Investment" is the wrong word for it.... unless you call throwing your money down a rat hole into the abyss an "Investment"... But... It's *MY* house! *Sigh* Thanks John |
|
| Author: | douglas ingram [ Thu Apr 15, 2010 10:52 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
Just work that actually earns me money... But I have been sharpening my carving chisels for carving the viola da gamba scroll! |
|
| Author: | Jeff Highland [ Fri Apr 16, 2010 12:25 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
Installing tentalones (lining blocks to the top and side join for my first flamenco. Found tentallones and HHG to be quite an enjoyable relaxing experience. |
|
| Author: | Christoph [ Fri Apr 16, 2010 12:53 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
Finished binding and scraping my first OM (and second in total)... After almost 2 hours of scraping my right hand is close to a typewriter's cramp. Attachment: IMG_0739-2.jpg Attachment: IMG_0740-2.jpg Attachment: IMG_0742-2.jpg As you can tell by the number of pictures posted, I am quite happy with the way this delicate step turned out. 
|
|
| Author: | Alexandru Marian [ Fri Apr 16, 2010 3:14 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
Jeff, I suggest dentellones as the correct spelling ( sorry can't help myself on the subject ![[uncle]](./images/smilies/surrenderflagqv6.gif "Uncle") ) I am making a new rosette in a 3 piece Swiss spruce top. It's just for fun - I developed a nasty palm strain from the gramil so binding my current build is on hold. |
|
| Author: | MaxBishop [ Fri Apr 16, 2010 5:50 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
Filippo Morelli said, Quote: So who was it that said ebony dust filled fret slots are visible?! You must be doing something wrong. Impossible to find on this guitar - a very clean look. Thanks to those that suggested this approach. It blows away having to bind: Hey, Filippo, What did you do there? Did you clip the ends of the fret tangs and fill with ebony dust and CA? That looks great. I would like to try it on a future build. Thanks, Max |
|
| Author: | Keith Lally [ Fri Apr 16, 2010 6:16 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
I'm cleaning up the f-holes and bracing the top. 
|
|
| Author: | Mike Dotson [ Fri Apr 16, 2010 11:24 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
Working on the fingerboard and handguard for the new tricone. Both wenge. The guard still needs drilled for the screws and then lots of shaping. FB still needs inlays...then there's the tailpiece. Lots to do! 
|
|
| Author: | Chris Paulick [ Fri Apr 16, 2010 6:53 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
Finished the bindings and purfs and sanded it this morning. Choose the FB and Bridge wood , Afican Blackwood . I think I'm going to give Zpoxi a try for e the fill too. |
|
| Author: | Chris Paulick [ Fri Apr 16, 2010 7:06 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
One more. |
|
| Author: | the Padma [ Fri Apr 16, 2010 7:40 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
Well this morning I started to make 3 dozen of these type of Jorgie clamps out of maple and threaded wooden dowel. Small ones...for clamping linings.  but then decided to get drunk. Why ~ cuz its Friday well at least I think its Friday...no matter. Any ways me gotta sample the Xmas beer at least once a week ~ to make sure its aging properly, ya know what me is saying.  blessings the drunk Padma |
|
| Author: | Rob Warren [ Sat Apr 17, 2010 7:43 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
Had this Ibanez in for repair. Fell off a chair. The owner couldn't figure out why the intonation suddenly went out of wack, until he noticed the bridge post tilted forward. It's a Basswood body, so I thought the hole probably egged out, but when I took the pickguard and bridge off I found this Attachment: DSCF1759.JPG Knocked a chunk right out into the pickup cavity. Easy fix though... And the Baritone Uke just got the box closed(not trimmed flush yet) Attachment: DSCF1761.JPG
|
|
| Author: | David LaPlante [ Sat Apr 17, 2010 8:33 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
French polish, French polish, polish, polish, polish.......................... Attachment: LaPlante#95finish.jpg
|
|
| Author: | Arnt Rian [ Sat Apr 17, 2010 1:17 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
I'm currently making a big batch of instruments, here are some of them... 
|
|
| Author: | James Orr [ Sat Apr 17, 2010 1:48 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
Filippo, wow wow wow wow! |
|
| Author: | SteveSmith [ Sat Apr 17, 2010 8:15 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
No pics but closed the box on the 000-13 I've been working on. |
|
| Author: | Alan [ Sun Apr 18, 2010 7:06 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
Arnt Rian wrote: I'm currently making a big batch of instruments, here are some of them... Now that is an inspiring batch. Looks like you had to stop because you ran out of molds! |
|
| Author: | Dave Ellingsworth [ Mon Apr 19, 2010 9:07 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
Been out a while. Wife and I are travelling. Had to break down the shop as we sold the house and hit the road. Sure miss the fun. You guys are producing some wonderful looking instruments. Keep up the good work. Wish I could find an open shop near Des Moines, just to spend some time in the shop, watching. Later ... Dave |
|
| Author: | Arnt Rian [ Mon Apr 19, 2010 9:31 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
Alan wrote: Now that is an inspiring batch. Looks like you had to stop because you ran out of molds! Nah, I have a couple more, but in this batch I'm doing mulitples of some of the ones in the picture. I'm just building the boxes as a big batch, then I'll be working on them individually after that. Doing every step on all of them at the same time would be like ... 
|
|
| Author: | Stuart Gort [ Mon Apr 19, 2010 11:08 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
I'm being cautious about not offering up my fingers to luthrie so I'm making this rip saw in lieu of a table saw. I'll be able to cut 2.5" x 16" x 48" stock to any width 1" - 10". The saw is designed with plain, frelon coated linear bearings running on ceramic coated shafts. The stock will be clamped down to the platter. Should be about as safe as can be. The design is complete and I'll begin on this next week. |
|
| Author: | Eric Reid [ Mon Apr 19, 2010 12:51 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
This week I'm trying to learn more about posting pictures. |
|
| Author: | CWLiu [ Tue Apr 20, 2010 12:26 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
BWV1006a Loure Finally learn the latter half of this little piece. It was played with the retopped guitar and it came out better than my expectation. |
|
| Author: | enalnitram [ Tue Apr 20, 2010 8:49 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
Over the weekend I got my binding jig built out of leftover junk to work, and like a virgin, I cut binding channels for the very first time. I made it thru the wilderness, somehow I made it through. And now I'm posting these pics, I'm posting them all for you.     
|
|
| Author: | windsurfer [ Tue Apr 20, 2010 9:51 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
did you cut binding channels thru the tape ? -jd |
|
| Author: | enalnitram [ Tue Apr 20, 2010 10:59 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 16th? |
windsurfer wrote: did you cut binding channels thru the tape ? -jd Yes. On a test piece the bearing left a harsh-looking groove, and I was a little worried about tear out on the top, so I went overboard with tape. I turned out really good though. |
|
| Page 1 of 2 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|