| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| What's Happening In YOUR Shops April 9th (Pics) http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=26902 |
Page 1 of 3 |
| Author: | Hesh [ Fri Apr 09, 2010 5:32 am ] |
| Post subject: | What's Happening In YOUR Shops April 9th (Pics) |
Since this has been Swapapalooza week feel free to post pics of your score if you wish and/or tell us what you intend to do with your new acquisitions. ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up") As for me I spent very little time in my shop this week but my golf game is coming along nicely....   So you know the drill - let's see what's happening in YOUR shops this week please? Thanks! 
|
|
| Author: | Hesh [ Fri Apr 09, 2010 9:08 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
I just had a couple of fun hours in the shop so I thought that I would post some pics. I'm starting another Tiger Myrtle guitar and this one is going to be a black topped OM to complete the triad of the black topped L-OO and Dreadn*ught... Here is some TM binding passing through the Play-Dough Fun Factory.... Attachment: DSC03026.jpg Here is why we use 80 grit for hardwoods..... I forgot to change the paper in my Performax thickness sander and it had 120 grit already installed.....  Fortunately this happened early on when I had lots of thickness to still sand off....Attachment: DSC03027.jpg Attachment: DSC03028.jpg Closer inspection of the shop-cut Klingspore 120 belt revealed that one side is indeed burned..... Attachment: DSC03029.jpg I threw on a 80 grit belt and sanded the burned spot off. Attachment: DSC03030.jpg This is my first time out with my Performax hooked to my new dust collector. I have to say that I am very pleased with the results in as much as my dust collection is now much stronger so much so that even with the door open on the Performax it was interesting to watch the dust being pulled from the drum's cooling fins and into the dust collector.... The specs that you see flying from the end of the drum are dust - pretty cool and this clean freak was amused.... Attachment: DSC03031.jpg So now my TM sides will get sanded with the ROS to remove any thickness sander lines/scratches and then it's into the bender. Attachment: DSC03033.jpg Thanks for looking.
|
|
| Author: | douglas ingram [ Fri Apr 09, 2010 9:08 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
Mostly I'm having to put my lutherie activities on hold, or at least slow motion in the greater interest of actually making money. I am, however, able to get back to my wife's viola da gamba project. I'm at the stage of roughing out the scroll of the neck and preparing the drawing for the back of the scroll carving. Just needs a little tweeking to get the proportions just right, there are a couple of spots that feel a little squished. |
|
| Author: | Alexandru Marian [ Fri Apr 09, 2010 9:44 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
Santa day today. Some hide glue, a couple short rulers, a glue brush, new caliper head, micromesh pads, but most important a Herdim reamer. Its quite pricey but darn, the action is so smooth. Recommended. |
|
| Author: | Oskar Strådal [ Fri Apr 09, 2010 12:12 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
I strung upp my first born this week! Been busy trying to get the action right and I think I might have to plane down the bridge or reset the neck angle to get as low as I want. But I am quite happy with the way it looks(with all its flaws) and sounds, I´m quite exciting to see how much she will open upp.  
|
|
| Author: | Fred Tellier [ Fri Apr 09, 2010 1:18 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
I just strung up number 6 the Bubinga OM Wedge, and have done enough setup that I can play it. The nut slots can go down some and the saddle needs about .030 or so removed to get it into my comfort zone around .080 at the 12th. I like to play a guitar for a few weeks then do the final the set up. I have to decide if I will do one of Mario's Tortoloid pick guards, or a clear one. I have of Mario's ready that was destined for the 12 fret before I decided on clear, I always seem to revert back to the no pick guard look.    Fred |
|
| Author: | Alexandru Marian [ Fri Apr 09, 2010 1:34 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
Fred, that looks quite beautiful. I was thinking about stocking up some Bubinga while prices are still very low (or quality high). Where did you get yours. |
|
| Author: | John A [ Fri Apr 09, 2010 2:11 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
I like these thread Hesh - as it keeps me on my toes to show quality work and some form of progress each week !! thanks Today I finished up a Chris Paulick (sp) jig - thanks Chris !! - it is to cut radial rosettes ! Attachment: radial_rosette jig2.JPG Attachment: radial_rosette jig1.JPG and I am gluing up some herring bone purfling - |
|
| Author: | jason c [ Fri Apr 09, 2010 4:21 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
I'm still chipping away at my archtop. Right now I'm building jigs for the neck. I also finished a couple of tailpieces. |
|
| Author: | ChuckB [ Fri Apr 09, 2010 4:28 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
Getting this 14 fret 0 size ready for finish, hope to spray it this coming week. I still have to pore fill and seal. And since it is white oak,, there are a lot of pores to fill!! Attachment: 0size7.jpg Attachment: 0size6.jpg Attachment: 0size4.jpg Attachment: 0size1.jpg
|
|
| Author: | Fred Tellier [ Fri Apr 09, 2010 4:35 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
Quote: I was thinking about stocking up some Bubinga while prices are still very low (or quality high). Where did you get yours. Hi Alexandru The Bubinga came from the Zootman from last years OLF online swap. I picked up two sets, that one had a cool sapwood center but I cut it off because of worm holes that I thought would spoil the look when repaired. My other set is real nice and I picked up another set from Shane in this years swap. I played the guitar quite a bit today as did several of my friends and I love the sound, I think a little brighter than Rosewood. Fred |
|
| Author: | Hesh [ Fri Apr 09, 2010 5:22 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
WOW - you guys are a pretty talented lot! John thanks for the thanks - I feel the same way and these threads also help me not be the slacker that I often want to be.... Fred I agree with the others your guitar is looking absolutely killer my friend - very nicely done!!! Also wanna tell us again how you get your bridges looking so good? Chuck your guitar looks fantastic too and I have some oak here that a great friend gave me  and now I want to build with it!Very nice work Jason - which tail piece is slated for this guitar? Oskar your guitar also looks fantastic and for a first it's even better!!! You might want to avoid planing the bridge and instead rework the neck angle if that is indeed what needs to change. Planing bridges, unless they are too high to begin with, is not the best of practices. Nice score Alexandru my friend. What's the deal on the Herdim reamer - what makes them so nice? Beautiful work Douglas and I am going to be watching this one with great interest - it's looking very cool already! Let's see some more of what's happening in YOUR shops please? Thanks
|
|
| Author: | Alexandru Marian [ Fri Apr 09, 2010 5:50 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
Well I searched a bit around and it seems most ppl agree Herdim's are the best reamers out there even if they are pricey. For example my model, but coated with titanium nitride, is a whopping 125$ at LMI. In any case, I did a few test fittings and it cuts with little effort, no jerking, leaves a clean wall in both rosewood and cedrela and the hole is nicely round. I don't have experience with the cheaper varieties, maybe they work just as well too, but I preferred not to risk having enough money to blow
|
|
| Author: | Stephen Boone [ Fri Apr 09, 2010 6:30 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
Closed the box on my Oregon build |
|
| Author: | ChuckB [ Fri Apr 09, 2010 7:32 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
Thanks Todd. You sure are correct about the pores in red oak. I'm not so sure I'd build with it because of that, but if I would get that special piece.....? Chuck |
|
| Author: | jason c [ Fri Apr 09, 2010 9:16 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
Hey Hesh, the ebony one is going on this guitar. I made the maple one as a mock-up since I'd never made a Hill/English style tailpiece before. It turned out so nice though that I'll probably use it on guitar #2 perhaps. |
|
| Author: | CWLiu [ Sat Apr 10, 2010 1:05 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
I am retopping a guitar with a too-much-bearclaw Sitka. |
|
| Author: | Hesh [ Sat Apr 10, 2010 7:04 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
jason c wrote: Hey Hesh, the ebony one is going on this guitar. I made the maple one as a mock-up since I'd never made a Hill/English style tailpiece before. It turned out so nice though that I'll probably use it on guitar #2 perhaps. Thanks Jason and yeah they both look very cool - nice work! CW killer looking top! Looking great Stephen! Thanks Alexandru - so LMI carries these - very cool! |
|
| Author: | cwood8656 [ Sat Apr 10, 2010 9:15 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
I'm binding number 4, and waiting for number 3 to be delivered back home from Joe White's place. Chris. 
|
|
| Author: | Edward Taylor [ Sat Apr 10, 2010 9:27 am ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
Nice guitar Todd, can I ask if there is any special treatment you give to a burl rosette, like epoxy or anything? As for me, starting a contest telecaster that I have 3 weeks to complete.  Should be doable though... |
|
| Author: | Alexandru Marian [ Sat Apr 10, 2010 12:10 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
No ideea how this looks in real but nice photo! One of the rare occasions when I like a cedar top with (near) white sides! The rosette color definitely helps. |
|
| Author: | Ken McKay [ Sat Apr 10, 2010 1:21 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
Beautiful work everyone. Can't wait to see the carving on the Gamba Douglas. Here is what I am working on. It is a white pine that I will have quartersawn into billets large enough for double bass size. |
|
| Author: | Ken McKay [ Sat Apr 10, 2010 1:56 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
Hey Todd, Double basses have always been made from ANY wood that was available that fits into the range of specific gravity that might work. Backs and sides of willow, poplar, walnut, pine all were used. Tops of any light wood that is stable. They are then graduated to make the plates work together, back and top. White pine works very well, a great american maker who's basses sell for big money now named Abraham Prescott and other early american makers used it as well. Straight grained wood is nice but wood on the slightly quirky side is sometimes better for an instrument of this scale. Within reason, of course. Don't get me started
|
|
| Author: | Jamie_M [ Sat Apr 10, 2010 4:22 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
Well...in the shop, not too much guitar building this weekend. I've been wet sanding out a 000 I reset the neck and resprayed a while back. It's my number 1, so I wanted to get it redone. Otherwise, I've been building a hall table and a coffee table. Walnut tops and curly maple base. Trying curved legs... Plus, now that the nice weather is upon us, my trusty helper and I are working on my other hobby...when will I learn? |
|
| Author: | douglas ingram [ Sat Apr 10, 2010 5:43 pm ] |
| Post subject: | Re: What's Happening In YOUR Shops April 9th (Pics) |
Ken McKay wrote: Beautiful work everyone. Can't wait to see the carving on the Gamba Douglas. Here is what I am working on. It is a white pine that I will have quartersawn into billets large enough for double bass size. Thanks, Ken. You're not the only one who can't wait. I used White Pine on my last guitar, a Torres FE17 exploration. I was mightily impressed with the pine! I had a white cedar top all prepared for my gamba and after my experience with the pine, am going to have to prepare a new top! I have some time to while I carve the scroll....lots of time! |
|
| Page 1 of 3 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|