Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Old Gibson archtop back brace reglue.
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=26812
Page 1 of 1

Author:  matthewrust [ Thu Apr 01, 2010 3:51 pm ]
Post subject:  Old Gibson archtop back brace reglue.

Hey gang! Not a building question, but I know you all can help and I would very much appreciate it.

I recently transported my 1950 Gibson ES-125 and it got knocked pretty hard on the back and every one of the 4 back braces is loose now. I don't have a soundhole to work through. Should I take this into a "pro"? Will they take the back off or is there a way to reglue and clamp thtough the F-holes?

Could someone recommend a repair person in the southern Indiana area to help me with this if you don't think I can handle it.

Thanks so much for your help.

Author:  Jeff Highland [ Thu Apr 01, 2010 8:05 pm ]
Post subject:  Re: Old Gibson archtop back brace reglue.

I have a "54 and a "67 es125 and neither of them have back braces, just a arched laminated back.
Does the '50 have a flat back with braces?
You may be able to get better access thought the pickup hole.

Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/