Michael:
My Hana Lima baritone plans call for 20 1/8" nut to saddle but I would check it out on the Stewmac fret calculator.
Bob
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| baritone Uke. questions. http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=26795 |
Page 1 of 1 |
| Author: | Michael.N. [ Wed Mar 31, 2010 3:03 pm ] |
| Post subject: | baritone Uke. questions. |
I;m in the throes of making a 6 string Baritone ukulele with a s,l. of 19.5". Never having made such a short scale fixed fret instrument I could do with a 'ballpark' figure for string compensation - using Nylon/Nylgut. |
|
| Author: | unkabob [ Wed Mar 31, 2010 5:45 pm ] |
| Post subject: | Re: baritone Uke. questions. |
Michael: My Hana Lima baritone plans call for 20 1/8" nut to saddle but I would check it out on the Stewmac fret calculator. Bob
|
|
| Author: | Doug Powdrell [ Wed Mar 31, 2010 7:00 pm ] |
| Post subject: | Re: baritone Uke. questions. |
I've done a few tenor ukus (17")....and added 1/32-2/32" for string length comp. Might consider a wider saddle to fine tune at set-up. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|