| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| top bracing a fan fret bridge http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=26697 |
Page 1 of 1 |
| Author: | Bailey [ Thu Mar 25, 2010 10:39 am ] |
| Post subject: | top bracing a fan fret bridge |
OK, top is ready for bracing on a classical (hauser shape) ....but I'm incorporating a fan fret design which will angle the bridge.....Since the top is still a flat design, should I do anything different in the fan bracing other than place the bridge plate in the angle position? Center location of the angled bridge is still 650...as are my plans for straight 650 location. Kent |
|
| Author: | TonyKarol [ Thu Mar 25, 2010 10:48 am ] |
| Post subject: | Re: top bracing a fan fret bridge |
When a student and I did his 635/650 7 string fan, we left the top braces exactly where they would have been normally ... just angle your bridge as required. Different story when its a SS |
|
| Author: | Bailey [ Thu Mar 25, 2010 11:22 am ] |
| Post subject: | Re: top bracing a fan fret bridge |
Thanks Tony.....I shall move forward. AND....what a cool thing having the great TE giving your Bari guitar a whirl and a nice comment afterwords. Kent |
|
| Author: | Colin North [ Thu Mar 25, 2010 12:34 pm ] |
| Post subject: | Re: top bracing a fan fret bridge |
Bailey wrote: Thanks Tony.....I shall move forward. AND....what a cool thing having the great TE giving your Bari guitar a whirl and a nice comment afterwords. Kent Sure was! Would've been even better if he'd ordered one though. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|