| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Protective masking http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=26676 |
Page 1 of 1 |
| Author: | Dave Stewart [ Wed Mar 24, 2010 8:49 am ] |
| Post subject: | Protective masking |
Back in my manufacturing days, we used a low tack 2 or 5mil poly (bought in wide rolls) to cover & protect polished/delicate surfaces from harm during work. (Think same type of thing you peel off plexi once you're finished working it.) I noticed, in BRB#5, Jeff Taugott recommended a thin and low (post-it note) tack material called "premask". I'm always concerned that, the closer you get to the end, the risk of "dings/blemishes" goes up exponentially! (Nothing worse!) So, I guess my question is, what if anything do you use (other than plain masking tape) and where do you get it? |
|
| Author: | Pete Brown [ Wed Mar 24, 2010 9:19 am ] |
| Post subject: | Re: Protective masking |
Frisket film, available from most art supply stores in sheets or rolls. |
|
| Author: | Dave Stewart [ Wed Mar 24, 2010 4:04 pm ] |
| Post subject: | Re: Protective masking |
Thanks Pete! |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|