| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Blargh--waist blowout during bend http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=26641 |
Page 1 of 1 |
| Author: | kmcanney [ Sun Mar 21, 2010 4:29 pm ] |
| Post subject: | Blargh--waist blowout during bend |
I was bending a set of sapele sides and ended up with some cracking/blowout on the inside of the waist curve on one of my sides. This one's for me, so I'm going to try to salvage the side if I can. I was thinking I'd work some wood glue under the lifted bits and clamp it all back together in my mold. Anyone have any good tips for fixing blowout? Has this -- or something else -- worked well for any of you in the past? Thanks in advance, -Kevin |
|
| Author: | StevenWheeler [ Sun Mar 21, 2010 4:37 pm ] |
| Post subject: | Re: Blargh--waist blowout during bend |
What has worked for me in the past is to repeatedly bash the living sh*t out of the offending side until I had a good supply of toothpicks. The meds are helping. Steve |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|