| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Grover Sta-Tite Bushings...Two Sizes? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=26625 |
Page 1 of 1 |
| Author: | Terence Kennedy [ Sat Mar 20, 2010 7:40 am ] |
| Post subject: | Re: Grover Sta-Tite Bushings...Two Sizes? |
I couldn't find a counterbore that really seemed to fit those bushings Todd so I have been using the replacement Waverly bushings from StewMac for the Grovers as the shaft fits just fine. I like the way they look a little better anyway. Let us know what you find out. |
|
| Author: | Arnt Rian [ Sat Mar 20, 2010 1:31 pm ] |
| Post subject: | Re: Grover Sta-Tite Bushings...Two Sizes? |
Todd Stock wrote: the latest sets of V97's have a larger bushing than either spec or what was being provided with earlier sets, and the difference is enough to split a headstock or faceplate if you force it. Yeah, I just found that out the hard way  The new owner was supposed to come by to try out his new guitar the next day, of course
|
|
| Author: | Kent Chasson [ Mon Mar 22, 2010 2:02 pm ] |
| Post subject: | Re: Grover Sta-Tite Bushings...Two Sizes? |
Arnt Rian wrote: Yeah, I just found that out the hard way The new owner was supposed to come by to try out his new guitar the next day, of course Yep. My aha moment was at midnight on a Friday night when I had 9 guitars to do complete setups on for this hard deadline on Sunday. http://lbs.mtbaker.us/index.php?option= ... Itemid=122 Nothing like an extra hour of hair pulling when you're already sleep deprived and up against the wall. Looked like the plating may have been extra thick on this batch. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|