Official Luthiers Forum!
http://www.luthiersforum.com/forum/

black/white/black fiber looking for some
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=26427		 Page 1 of 1
Author:  stan thomison [ Tue Mar 09, 2010 9:03 am ]
Post subject:  black/white/black fiber looking for some
Do any of you know of a source selling b/w/b fiber already laminated together? Looking for .060 total for some heel cap and back of headstock so not have to route that out
Author:  Hank Mauel [ Wed Mar 10, 2010 12:04 am ]
Post subject:  Re: black/white/black fiber looking for some
Gurian can make it up, but I'm not sure what their "minimum charge" is these days. http://www.gurianinstruments.com/

Or, you can buy the individual sheets from LMI and lay up each in succession on the headstock. Tedious but probably cheaper than getting it "made to order".
Author:  Shane Neifer [ Wed Mar 10, 2010 1:36 am ]
Post subject:  Re: black/white/black fiber looking for some
Hey Stan,

I have black and white fibre (.020) that is not laminated and I have b/w/b (.020/.020/.020) that is laminated from black dyed pearwood and maple (I like the "woody" colours better than the stark white of fibre). If any of these suit you let me know.

Thanks

Shane
Author:  Dan Roach [ Wed Mar 10, 2010 9:47 am ]
Post subject:  Re: black/white/black fiber looking for some
LMI carries b/w/b fiber 1/4" x 0.06"
http://www.lmii.com/CartTwo/thirdproducts.asp?CategoryName=Bindings+%26+Purflings&NameProdHeader=Bold+Multi%2DLine+Purfling
Author:  Terence Kennedy [ Wed Mar 10, 2010 10:03 am ]
Post subject:  Re: black/white/black fiber looking for some
Walter lipton at Euphonon has .060 bwb fiber. I use it all the time. That's purfling though. Were you looking for sheet Stan?
Terry
Author:  Hank Mauel [ Wed Mar 10, 2010 1:44 pm ]
Post subject:  Re: black/white/black fiber looking for some
Shane Neifer wrote:
Hey Stan,

I have black and white fibre (.020) that is not laminated and I have b/w/b (.020/.020/.020) that is laminated from black dyed pearwood and maple (I like the "woody" colours better than the stark white of fibre). If any of these suit you let me know.

Thanks

Shane


Shane seems to be expanding his supplies faster than we can keep track! [:Y:]

Shane..a suggestion...add that "sidebar" list of products that shows on the "Pricing in US Dollars" page over on the "Home" page so we don't have to hunt around for all the goodies you carry. That way the first landing on your site provides a list of products/services...especially for first timers or the less adventurous.
Author:  Steve_E [ Wed Mar 10, 2010 6:24 pm ]
Post subject:  Re: black/white/black fiber looking for some
Shane Neifer wrote:
Hey Stan,

I have black and white fibre (.020) that is not laminated and I have b/w/b (.020/.020/.020) that is laminated from black dyed pearwood and maple (I like the "woody" colours better than the stark white of fibre). If any of these suit you let me know.



I have Shane's b/w/b and they're gorgeous!! I agree, the pearwood and the maple are exactly what I wanted!
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/