| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Martin binding looses to hot car http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=26357 |
Page 1 of 1 |
| Author: | jason c [ Thu Mar 04, 2010 12:08 pm ] |
| Post subject: | Martin binding looses to hot car |
I have a Martin here that got left in a hot car and the binding has all come loose. My first thought is to rebind it since the binding has srunk enough that has to be pulled TIGHT to get it back into the rabbets. However, I'm unclear as to how to get the binding under the neck. I can pull the neck but I would rather not. Any tricks for this? Jason |
|
| Author: | bluescreek [ Thu Mar 04, 2010 12:30 pm ] |
| Post subject: | Re: Martin binding looses to hot car |
I use a hair dyer and heat the binding so it can restretch . I am sure there will be other helpful hints coming your way. |
|
| Author: | Dave Rickard [ Thu Mar 04, 2010 1:00 pm ] |
| Post subject: | Re: Martin binding looses to hot car |
John, good idea on the hair dryer. Not wanting to high jack this thread but if the guitar got that hot wouldn't it have some glue joints that might fail also? |
|
| Author: | stan thomison [ Thu Mar 04, 2010 1:05 pm ] |
| Post subject: | Re: Martin binding looses to hot car |
What John said, but not to much hea. A dryer wouldn't get or shouldn't need to be much hotter than what outside/or inside car would get to cause problem in first place. Boss showed me using a hot iron with some backing making a ping pong ball and some binding going poof and little fire. Lot of older and maybe newer Martins and other brands used cellulose and it is flammable at some point of heat. Not know the temp, but heat iron and some metal on it made a neat illustration and point was taken. Would check all of guitar if got that hot for other issues. |
|
| Author: | jason c [ Thu Mar 04, 2010 2:47 pm ] |
| Post subject: | Re: Martin binding looses to hot car |
Oh, there are plenty of other issues. The bridge is coming up, the back has separated from the sides plus some cracks in the back. All that stuff I'm fine with, it's just if I have to replace the binding on the top. Getting under the neck has me scratching my head. Like I said, I can take the neck out but I really don't want to. It's a shame too because you can just tell this guitar just doesn't get taken care of. We should start a guitar foster care system.  Jason |
|
| Author: | the Padma [ Thu Mar 04, 2010 3:13 pm ] |
| Post subject: | Re: Martin binding looses to hot car |
jason c wrote: Oh, there are plenty of other issues. It's a shame too because you can just tell this guitar just doesn't get taken care of. We should start a guitar foster care system. Jason Well jason.... . The Padmapa Institute for Wayward, Abused, Neglected and Abandoned Guitars is always open to receive and provide loving, nurturing and caring hands to all stringed musical instruments. Just ship your instrument to "the Padma" C/o this here forum. and we will take it from there. While you are at it, you may wish to make a small cash donation to the Padmapa Institute to assist in our restorative programs. Just stuff some cash into an envelope and send to "the Padma" Or stuff it inside the sound hole when you donate and enroll your instrument into our program. All donations are graciously received and go directly into the Padma's pocket. Please no COD, Plastic cards or Pay Pal...the Padma runs on cash only. Blessings  Padma |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|