Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Gibson SJ200
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=26282		 Page 1 of 1
Author:  double-a [ Sat Feb 27, 2010 1:36 pm ]
Post subject:  Gibson SJ200
Hi
Does anyone here have the dimensions of the older Gibson SJ200?
I can't seem to find all of them.(body). Thanks in advance. :)
Allen
Author:  coke_zero [ Sat Feb 27, 2010 2:16 pm ]
Post subject:  Re: Gibson SJ200
Not sure if this is 100% but I did some searching around:

> Tailblock: Between 4 3/4 inches and 5 inches
> Lower bout: 4 3/4 inches
> Waist: 4 1/2 inches
> Upper bout: 4 inches
> Neck Block: 3 3/4 inches


From here http://popularusenetgroups.com/showthread.php?t=559824
Author:  coke_zero [ Sat Feb 27, 2010 2:51 pm ]
Post subject:  Re: Gibson SJ200
Too late to edit.

Those aren't all the details obviously but it's a start :cry:
Author:  double-a [ Sun Feb 28, 2010 8:48 pm ]
Post subject:  Re: Gibson SJ200
Thanks,
But what I need the most are the 3 widths (upper bout, waist, and
lower bout, along with the body length. If I have the neck and tail-block heights, the rest will come naturally.
Thanks again, :)
Allen
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/