| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Buffing a slotted peghead http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=26110 |
Page 1 of 1 |
| Author: | Daniel Minard [ Wed Feb 17, 2010 5:43 pm ] |
| Post subject: | Buffing a slotted peghead |
I'm just finishing up my first slotted peghead (on a Stella style parlour guitar) & I'm wondering if any of you have advice on buffing inside the slots. The lacquer is going on very nicely & probably will look fine if I leave it alone, but any tricks or tips would be welcomed. Thanks. Dan |
|
| Author: | Haans [ Wed Feb 17, 2010 6:20 pm ] |
| Post subject: | Re: Buffing a slotted peghead |
I give 'em a 600 grit sand after the first build up, then just leave them alone. Gawd knows, Stella didn't do much I suspect. |
|
| Author: | gozierdt [ Wed Feb 17, 2010 8:34 pm ] |
| Post subject: | Re: Buffing a slotted peghead |
If you get a nice smooth coat on the inside of the slots, I'd leave it alone... |
|
| Author: | Alain Moisan [ Wed Feb 17, 2010 8:42 pm ] |
| Post subject: | Re: Buffing a slotted peghead |
Ditto. |
|
| Author: | Daniel Minard [ Wed Feb 17, 2010 9:38 pm ] |
| Post subject: | Re: Buffing a slotted peghead |
Thanks Guys! Just finished spraying the last coat & it looks nice & shiny... Should do the trick. Sure is cool, finally having a real spray room! No dust, no bugs, no sweat! Dan |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|