| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Looking for Neck Block ideas (Steel String Build) http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=26019 |
Page 1 of 1 |
| Author: | Brad Simmons [ Thu Feb 11, 2010 8:58 pm ] |
| Post subject: | Looking for Neck Block ideas (Steel String Build) |
I have been looking around for a few ideas regarding a neck block for a steel string build. Anyone care to chime in. I will be using a tenon joint for my 1st build. Brad |
|
| Author: | StevenWheeler [ Thu Feb 11, 2010 10:19 pm ] |
| Post subject: | Re: Looking for Neck Block ideas (Steel String Build) |
Brad, My favorite is the one that Colin Symonds posted. Search neck joint and put Colin S in as the author. You'll come up with this. |
|
| Author: | Corky Long [ Fri Feb 12, 2010 11:04 am ] |
| Post subject: | Re: Looking for Neck Block ideas (Steel String Build) |
Brad - William Cumpiano's site has a clear and simple explanation of the M&T neck joint that he now uses, supported by KD bolts. I like it a whole lot better than the dovetail that I mangled on my first three guitars.... |
|
| Author: | Brad Simmons [ Fri Feb 12, 2010 8:52 pm ] |
| Post subject: | Re: Looking for Neck Block ideas (Steel String Build) |
Thanks for the advice, I appreciate it. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|