Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Jig Building , I wish My Mando's And Guitars Were This Good
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25985		 Page 1 of 1
Author:  WudWerkr [ Wed Feb 10, 2010 12:29 pm ]
Post subject:  Jig Building , I wish My Mando's And Guitars Were This Good
I Have learned that a good part of building is the quality of jigs to do the job better and more accurately . At least I hope laughing6-hehe . So I set out to make a Saw Jig for Tops and Backs as well as a glue Board , and Shooting/ Sanding Board . The Next set of Pics are the Saw Board I built . It turned out good and the cut is almost dead on so my "shooting board " became a touch up sanding board .
Attachment:
100_0562.jpg
Attachment:
100_0563.jpg
Attachment:
100_0564.jpg
Attachment:
100_0565.jpg
Attachment:
100_0567.jpg
Attachment:
100_0577.jpg
Attachment:
100_0568.jpg
Attachment:
100_0569.jpg
Author:  WudWerkr [ Wed Feb 10, 2010 12:31 pm ]
Post subject:  Re: Jig Building , I wish My Mando's And Guitars Were This Good
Continued :
Attachment:
100_0570.jpg
Attachment:
100_0571.jpg
Attachment:
100_0572.jpg
Attachment:
100_0573.jpg
Attachment:
100_0574.jpg
Attachment:
100_0575.jpg


I Can Handle 10" Wide x 22" Long Tops and Backs On This Saw Jig , And Up To 3/16' Thick pieces ( 3/8" Thick for 2 Halfs Together )
Author:  WudWerkr [ Wed Feb 10, 2010 12:54 pm ]
Post subject:  Re: Jig Building , I wish My Mando's And Guitars Were This Good
verhoevenc wrote:
But two 3/16' pieces together would actually be 4.5" thick!? pfft
laughing6-hehe
Chris



:shock: HUH ??? idunno Lost me bud ! laughing6-hehe

OHHHHHHHHHHHHHHHHHHHHHHHH roflmao NOW I SEE IT !! laughing6-hehe
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/