| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Everett set up DVD http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25943 |
Page 1 of 1 |
| Author: | RonaldD [ Mon Feb 08, 2010 12:12 pm ] |
| Post subject: | Everett set up DVD |
Hello, Would someone know if the Everett set-up DVD includes a section on fret levelling? Ronald |
|
| Author: | Zach Ehley [ Mon Feb 08, 2010 1:12 pm ] |
| Post subject: | Re: Everett set up DVD |
It does not cover fret installation, leveling, crowing, fret ends... It from the view of looking a an already built new or used guitar that needs set up tweeking. Covers "hello" to a guitar, truss rod adjustment, nut adjustment, saddle adjustment. |
|
| Author: | RonaldD [ Mon Feb 08, 2010 1:28 pm ] |
| Post subject: | Re: Everett set up DVD |
What DVD covers fretting including compound fretting dressing? How do you measure the actual compound of an existing guitar? Ronald |
|
| Author: | Randolph [ Mon Feb 08, 2010 3:36 pm ] |
| Post subject: | Re: Everett set up DVD |
Ronald, I'm not sure what "compound" fret dressing is but the Fret Basics DVD with Dan Erlywine is a good one. It covers fret dressing rather well. It's available at Stew Mac. |
|
| Author: | SteveSmith [ Mon Feb 08, 2010 4:08 pm ] |
| Post subject: | Re: Everett set up DVD |
I think the OP is referring to a compound radius fretboard. |
|
| Author: | Randolph [ Mon Feb 08, 2010 5:31 pm ] |
| Post subject: | Re: Everett set up DVD |
Don't think it's covered in "Fret Basics." I suggest a search on the Forum here. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|