| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Adi Pitch Solution http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25604 |
Page 1 of 1 |
| Author: | RaymundH [ Thu Jan 21, 2010 10:46 am ] |
| Post subject: | Adi Pitch Solution |
I have an Adi top for an OM that is absolutely wonderful, however, it has a perforated pitch pocket in the lower bout. Very small and thin but noticable enough that I want to properly fill and will end up sunbursting. Any thoughts on a proper fill job in this situation? Ray |
|
| Author: | Michael Dale Payne [ Thu Jan 21, 2010 10:51 am ] |
| Post subject: | Re: Adi Pitch Solution |
if it is narrow you can do a tapered splint insert from edge drop from the same top. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|