| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Cupped Plates Question http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25498 |
Page 1 of 1 |
| Author: | bill stewart [ Fri Jan 15, 2010 9:41 am ] |
| Post subject: | Cupped Plates Question |
I've read a few posts on this subject from the search section on how to deal with cupped plates.The advice is; wet the cupped side and lay cup side down on a concrete floor or on a wet towel, and leave for a few days. Now, here is the dumb question,  Is the cup side the "concave" or the "convex" side?  Bill S. |
|
| Author: | StevenWheeler [ Fri Jan 15, 2010 10:00 am ] |
| Post subject: | Re: Cupped Plates Question |
Concave |
|
| Author: | bill stewart [ Fri Jan 15, 2010 10:21 am ] |
| Post subject: | Re: Cupped Plates Question |
I figured as much but wanted to be sure. Thanks Bill ![[:Y:]](./images/smilies/smiley20.gif "Thumbs Up")
|
|
| Author: | Michael Dale Payne [ Fri Jan 15, 2010 10:25 am ] |
| Post subject: | Re: Cupped Plates Question |
no need to wet it |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|