| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Need Source for Performax 16/32 Abrasive Strips http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25490 |
Page 1 of 1 |
| Author: | Paul Burner [ Thu Jan 14, 2010 6:12 pm ] |
| Post subject: | Need Source for Performax 16/32 Abrasive Strips |
I'm in the need of some more sanding strips for my Performax 16/32. In the past I purchased the "ready-to-wrap" ones form Klingspor, but I'm guessing there's a more economical and better choice. Suggestions? Thanks |
|
| Author: | Mike Collins [ Thu Jan 14, 2010 6:49 pm ] |
| Post subject: | Re: Need Source for Performax 16/32 Abrasive Strips |
Paul; try www.customsandingbelts.com Mike |
|
| Author: | David R White [ Thu Jan 14, 2010 7:51 pm ] |
| Post subject: | Re: Need Source for Performax 16/32 Abrasive Strips |
I have bought for the Delta from: www.industrialabrasives.com They're swell. |
|
| Author: | jsmith [ Thu Jan 14, 2010 7:59 pm ] |
| Post subject: | Re: Need Source for Performax 16/32 Abrasive Strips |
Check your Klingspor catalog. They also sell longer, cut-your-own lengths. |
|
| Author: | Jon L. Nixon [ Fri Jan 15, 2010 8:33 am ] |
| Post subject: | Re: Need Source for Performax 16/32 Abrasive Strips |
Klingspor or Rockler sell rolls, which are at least 50% cheaper that precut strips. You can also get the rolls with printed cut marks, but they are fairly expensive. |
|
| Author: | Jon L. Nixon [ Fri Jan 15, 2010 8:40 am ] |
| Post subject: | Re: Need Source for Performax 16/32 Abrasive Strips |
Klingspor or Rockler sell rolls, which are at least 50% cheaper that precut strips. You can also get the rolls with printed cut marks, but they are fairly expensive. |
|
| Author: | mnemotorsports [ Fri Jan 15, 2010 8:48 am ] |
| Post subject: | Re: Need Source for Performax 16/32 Abrasive Strips |
When you guys run your wood through the thickness sander what level grit do you go up to. Just wondering if I should purchase higher grit. thanks matt |
|
| Author: | WudWerkr [ Fri Jan 15, 2010 9:07 am ] |
| Post subject: | Re: Need Source for Performax 16/32 Abrasive Strips |
I sell the roll materials in my business , would be glad to get you price if u wish , need grit width desired and weight of the material , IE "J" or "X" weight cloth usally that info is on the back of the materials . also is it standerd or hook and loop , I dont sell the hook and loop materials. wcaincj@aol.com is business email |
|
| Author: | Mike OMelia [ Sat Jan 16, 2010 9:37 pm ] |
| Post subject: | Re: Need Source for Performax 16/32 Abrasive Strips |
I love my Klingspor "Blue" paper rolls. Last forever. Save one of your used strips as a template. |
|
| Author: | Robert Dunn [ Sun Jan 17, 2010 5:27 pm ] |
| Post subject: | Re: Need Source for Performax 16/32 Abrasive Strips |
woodworker.com has pre cut and uncut. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|