Official Luthiers Forum!
http://www.luthiersforum.com/forum/

Dent in Zip-Flex purfling!@#
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25487		 Page 1 of 1
Author:  walnut47 [ Thu Jan 14, 2010 1:32 pm ]
Post subject:  Dent in Zip-Flex purfling!@#
Just finishing a dred with Zip-Flex purfling and last night I bumped the body against the edge my workbench (sometimes I think I may be too clutzy for luthiery :cry: . Managed somehow to put a dent in the Zip-Flex purfling. It's about 3/8 inch long and probably 1/32 or so deep. Have any of you had this happen? Any suggestions on fixing it? The only thing that I can think of is trying to fill the dent with CA.
Thanks in advance for any help.
Walter
Author:  Barry Daniels [ Thu Jan 14, 2010 1:44 pm ]
Post subject:  Re: Dent in Zip-Flex purfling!@#
Route out a section with a small inlay bit and install a new piece. If done carefully, you will never see the repair.
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/