| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Standard Martin Headstock Dimensions http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25433 |
Page 1 of 1 |
| Author: | Darryl Young [ Mon Jan 11, 2010 8:55 pm ] |
| Post subject: | Standard Martin Headstock Dimensions |
Anyone have teh standard dimensions for a Martin headstock? I'm building my first, an OM/OOO, and think I want to stick with the standard Maring headstock shape and dimensions. My headstock is oversized so I need to trim. Thanks! |
|
| Author: | Timcacca [ Tue Jan 12, 2010 2:48 am ] |
| Post subject: | Re: Standard Martin Headstock Dimensions |
I have the headstock scanned for a person I am building a guitar for, It's just the top but it's to scale. If you want it let me know. Tim |
|
| Author: | bluescreek [ Tue Jan 12, 2010 7:45 am ] |
| Post subject: | Re: Standard Martin Headstock Dimensions |
this may help |
|
| Author: | Darryl Young [ Tue Jan 12, 2010 9:02 am ] |
| Post subject: | Re: Standard Martin Headstock Dimensions |
Thanks everyone! John, that drawing is exactly what I needed......mucho gracias! |
|
| Author: | Darryl Young [ Tue Jan 12, 2010 12:24 pm ] |
| Post subject: | Re: Standard Martin Headstock Dimensions |
After looking at John's sketch and dimensions I have one more question. The headstock tapers out from the nut upward to teh point where it is 2 3/8" wide. Don't you need the dimension from the top of the headstock to the point where the headstock is 2 3/8" wide to reproduce the headstock?........or am I overlooking something? |
|
| Author: | Darryl Young [ Tue Jan 12, 2010 7:29 pm ] |
| Post subject: | Re: Standard Martin Headstock Dimensions |
Best I can determine using Todd's suggested method, the dimension I asked about is 5 1/4". |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|