I'll be here should there be any leftovers
| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| MJ TEMPLATES ARE IN!!!!! http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25423 |
Page 1 of 1 |
| Author: | LanceK [ Mon Jan 11, 2010 9:14 am ] |
| Post subject: | MJ TEMPLATES ARE IN!!!!! |
Folks, Our apologies for the huge delay. We really can only move as fast as our CNC guy. A long story made short is that our CNC guy makes nil cutting this stuff for us. Hes a friend of one of our OLF'ers and does this on the cheap for us. So, as we moved toward the end of last year his business picked up considerably and we continued to get bumped. No other excuse, he just cant make our stuff a priority if there is "real" work there to be done. We benefit by getting a great price on what he does for us. In my opinion its a worthy trade off. NOW, on to the templates. Yesterday I took delivery of the MJ templates complete with hardened steel bushings in the indexing holes. They look fantastic! Here is what were going to do. IF you ordered JUST the MJ template we will be shipping it this week, if you ordered the three pack, or the MJ along with any other template well be holding off and sending them together. We will have the SJ and OM's by the end of this week. I hope this is satisfactory, we truly are doing the best we can with this. Here are a few not so great pics I took this morning before leaving for work. Thanks again! Attachment: photo.jpg Attachment: photo (1).jpg Attachment: photo (2).jpg
|
|
| Author: | jaguarguy [ Mon Jan 11, 2010 3:07 pm ] |
| Post subject: | Re: MJ TEMPLATES ARE IN!!!!! |
I'll be here should there be any leftovers
|
|
| Author: | LanceK [ Mon Jan 11, 2010 3:21 pm ] |
| Post subject: | Re: MJ TEMPLATES ARE IN!!!!! |
jaguarguy wrote: I'll be here should there be any leftovers Indeed! We totally intend on doing this again, its clear that patience is the key factor. I am very happy though to be wrapping this project up! Please feel free to comment in this thread if you didn't get in on the first order and would be interested in getting in on the next, knowing in advance that the delays are probable. Needless to say, if we were tooled up for this personally, it would have been done long ago. |
|
| Author: | Steve Frady [ Tue Jan 12, 2010 8:35 am ] |
| Post subject: | Re: MJ TEMPLATES ARE IN!!!!! |
I ordered all three templates and will be looking forward to receiving them. Do you know of a source for the hardened steel bushings that are used in the templates. I would like to use these bushings with some other fixtures. Steve |
|
| Author: | Richard G [ Tue Jan 19, 2010 5:59 pm ] |
| Post subject: | Re: MJ TEMPLATES ARE IN!!!!! |
Bump! |
|
| Author: | gozierdt [ Wed Jan 20, 2010 6:55 pm ] |
| Post subject: | Re: MJ TEMPLATES ARE IN!!!!! |
Drill Bushings are available in many sizes and configurations from McMaster-Carr. http://www.mcmaster.com/#drill-bushings-and-liners/=5gnu02 I've always been pleased with their service, especially since many of my orders are pretty small for such a big house. |
|
| Author: | Mike OMelia [ Wed Jan 20, 2010 7:32 pm ] |
| Post subject: | Re: MJ TEMPLATES ARE IN!!!!! |
Are the "three packs" in the mail now? Mike |
|
| Author: | Richard G [ Sat Jan 30, 2010 1:52 pm ] |
| Post subject: | Re: MJ TEMPLATES ARE IN!!!!! |
How about a quick update??? |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|