| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| Accoustic / Electric Body Thickness http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25371 |
Page 1 of 1 |
| Author: | WudWerkr [ Fri Jan 08, 2010 5:01 pm ] |
| Post subject: | Accoustic / Electric Body Thickness |
I know this is probably a loaded Question , however here it goes . I am thinking about building an Acoustic/Electric Guitar and I am toying with a Body Thickness of approx 3-3/4" Is that to thin? What would be a good thickness to try . The Widest Part Of The Body as seen Below will be 14-1/2" Any Suggestions would be appreciated . This is my first effort on a guitar. Usally I do Mando's Attachment: 100_0503.jpg
|
|
| Author: | bluescreek [ Fri Jan 08, 2010 5:10 pm ] |
| Post subject: | Re: Accoustic / Electric Body Thickness |
Martin has a thinner one so I think you will be fine. |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|