| Official Luthiers Forum! http://www.luthiersforum.com/forum/ |
|
| What size stiffeners for fret blade? http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25358 |
Page 1 of 1 |
| Author: | Josh H [ Fri Jan 08, 2010 8:57 am ] |
| Post subject: | What size stiffeners for fret blade? |
I'm wondering what size stiffeners I need for a 6 in. slotting blade. Lee Valley has 3 1/2" and 5" stiffeners. Thanks Josh |
|
| Author: | TonyKarol [ Fri Jan 08, 2010 9:17 am ] |
| Post subject: | Re: What size stiffeners for fret blade? |
5 ... |
|
| Author: | Shane Neifer [ Fri Jan 08, 2010 10:13 am ] |
| Post subject: | Re: What size stiffeners for fret blade? |
Yup 5". I actually prefer the forrest stiffners but when you need two (which you do), it gets expensive. So the others will work as well. Shane |
|
| Author: | DannyV [ Fri Jan 08, 2010 11:33 am ] |
| Post subject: | Re: What size stiffeners for fret blade? |
You don't necessarily need 2 with your blades Shane. I can only use the outside one with my saw because the blade will fall into the threads on the arbour. I seems to work just fine. Danny |
|
| Author: | Josh H [ Fri Jan 08, 2010 1:07 pm ] |
| Post subject: | Re: What size stiffeners for fret blade? |
I thought it was 5. Thanks guys Josh |
|
| Page 1 of 1 | All times are UTC - 5 hours |
| Powered by phpBB® Forum Software © phpBB Group http://www.phpbb.com/ |
|