Official Luthiers Forum!
http://www.luthiersforum.com/forum/

New to Lutherie, but Advanced with CNC...Meet and Greet
http://www.luthiersforum.com/forum/viewtopic.php?f=10101&t=25058		 Page 1 of 1
Author:  jtCNC [ Tue Dec 15, 2009 8:16 pm ]
Post subject:  New to Lutherie, but Advanced with CNC...Meet and Greet
As the title states I am new to lutherie and this forum. I've enjoyed what I've found so far, and will be here often to educate myself. I'm in the process of building my mini machine shop / work area in my basement and I plan to build several guitars sooner rather than later. I am fortunate to have recently purchased a home made cnc router, and a mini milling machine which I hope to also convert to 3, or 4 axis cnc. I enjoy the barter system for many things, and knowledge is likely my favorite. I'm a CNC Programmer/set-up guy/tool room machinist and would love to offer my knowledge of all things CNC, g-code, multi-axis, CADCAM, fixturing, tooling, machine design, cutting speeds, etc up for anyone who needs it. As a rookie to guitar making and any precision woodworking for the most part, I am lacking knowledge pertaining to new materials, procedures, etc and will likely be on here asking all sorts of annoying questions. However since my strengths are in an area that seems to slowly be creeping into lutherie, I'm hoping my obsessiveness for my familiar trades will help someone in some way, make anything.

Regards,

Jon
Author:  Robert Dunn [ Tue Dec 15, 2009 8:41 pm ]
Post subject:  Re: New to Lutherie, but Advanced with CNC...Meet and Greet
welcome! You are going to love this place.
When i first came around, i gave everyone all the brw they could fit in a first class envelope.
you could probably share plans for a cnc router, and pirated software to go with it.

just kidding, obviously. you are going to love this place, and everyone that is willing to share their knowledge.
Author:  Bill Greene [ Tue Dec 15, 2009 9:24 pm ]
Post subject:  Re: New to Lutherie, but Advanced with CNC...Meet and Greet
Welcome!!!! Seriously, you're at the right place...and I'd imagine your skills will be in demand. If I can be of help, please shoot me a pm.

Bill
Author:  Parser [ Tue Dec 15, 2009 11:12 pm ]
Post subject:  Re: New to Lutherie, but Advanced with CNC...Meet and Greet
Welcome!

There are a few of us on here with CNC's...you're always welcome to cross the tracks and hang out with us in the CNC forum... :D

Trev
Author:  jtCNC [ Wed Dec 16, 2009 12:38 pm ]
Post subject:  Re: New to Lutherie, but Advanced with CNC...Meet and Greet
thanks everyone. Perhaps I'll venture over to the CNC forum and introduce myself there as well. I'm looking forward to making some wood chips.
Author:  Bob Garrish [ Wed Dec 16, 2009 1:59 pm ]
Post subject:  Re: New to Lutherie, but Advanced with CNC...Meet and Greet
Chip is an important word when it comes to wood :)

Wood machining, in general, is cake except for its propensity to chip and crack. That tendency puts it right behind G10-FR4 on my 'fun to machine' list :)
Author:  jtCNC [ Wed Dec 16, 2009 3:16 pm ]
Post subject:  Re: New to Lutherie, but Advanced with CNC...Meet and Greet
g10 fr4! [headinwall] That's right up there with phenolic on my list of tooling and health hazard nightmares. In my limited woodworking experience I've quickly found out that wood has its tendencies to split in front of the tool as opposed to metal (deforming away at the chip tool interface). In my optimism I'm hoping the woods and materials I'm soon to be using have better workability than say, the scraps I get at the lumber yard for the house...
Author:  Brock Poling [ Wed Dec 16, 2009 3:43 pm ]
Post subject:  Re: New to Lutherie, but Advanced with CNC...Meet and Greet
Your going to be a popular guy around here.
Author:  npalen [ Thu Dec 17, 2009 1:05 am ]
Post subject:  Re: New to Lutherie, but Advanced with CNC...Meet and Greet
Welcome aboard the OLFTRAIN, Jonathan!
Nelson
Page 1 of 1 All times are UTC - 5 hours
Powered by phpBB® Forum Software © phpBB Group
http://www.phpbb.com/